Correlation between Numerical and Experimental Structural Resistance of a Safety Relevant Aluminum Automotive Component

Accurate implementation of weight reduction for the development of innovative safety relevant components, such as suspension assemblies, requires a careful evaluation of the structural resistance. The validation of these critical parts usually employs Finite Element Analysis (FEA) during the design phase and laboratory tests on prototypes during later stages. However, the results of these established methods have rarely been numerically compared. The present paper introduces a method for comparing FEA and testing, based on the elaboration of micro-strains acquired with strain gauges positioned in specific regions. The model was applied to the real case study of an innovative lightweight cross beam. FEA simulations and bench tests under different conditions that were representative of the operating environments were carried out. Two different relevant configurations of fatigue bench tests were considered. Then, the data obtained from testing were numerically elaborated in order to compare them with the analytical results. Real data from in-field measurements were used. The cross beam endured at the elevate mission loads reproduced at the bench test. The FEA and testing results were aligned. The correlation method was proven to be reliable, since it made it possible not only to numerically evaluate the testing output, but also to validate the calculation tools, and it could be extended to similar applications in future.