According to the activities carried out within the Proof of Concept laboratory, a machine for block-on-ring wear tests was designed and realized. Consistent with the approach of the laboratory, the machine was developed with particular attention to the requirements of reliability, simplicity, as well as easy and fast production starting from existing devices integrated with ad-hoc made parts by the department equipment. The experimental campaign was performed according to ASTM G99 and ASTM G77. The results obtained on commercial pin-on-disc device and on the realized block-on-ring machine, showed a good agreement, validating the proposed solution. This appears particularly effective also based on an economic and technical comparison with commercial equipment complying with the same standard.
Design and Validation of a Block-on-Ring Test Bench
Paderno D.
;Bodini I.;Baronio G.;Uberti S.;Montesano L.;Tonoli S.;Pola A.;Villa V.
2022-01-01
Abstract
According to the activities carried out within the Proof of Concept laboratory, a machine for block-on-ring wear tests was designed and realized. Consistent with the approach of the laboratory, the machine was developed with particular attention to the requirements of reliability, simplicity, as well as easy and fast production starting from existing devices integrated with ad-hoc made parts by the department equipment. The experimental campaign was performed according to ASTM G99 and ASTM G77. The results obtained on commercial pin-on-disc device and on the realized block-on-ring machine, showed a good agreement, validating the proposed solution. This appears particularly effective also based on an economic and technical comparison with commercial equipment complying with the same standard.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
