The main sources of sound emitted by vehicles are the engine and the rolling noise produced by the tires. In case agricultural tractors are considered, the engine and the transmission are responsible of the main emissions since they often work in the fields on soft ground at low speeds. This work focuses on the combined acoustic and mechanical development of a new exhaust system for an existing agricultural tractor, with the aim of providing a product with improved acoustic performances and a neater design. The host vehicle is equipped with a 300 hp diesel engine which can be particularly noisy at low rpm, with a further constraint being the “under the bonnet” available volume to fit the system into. The existing exhaust system is the baseline for the engineering process. The acoustic design is carried out by a 1D simulation software based on an electro-acoustic analogy, while the design modelling is performed by using Solidworks® 3D CAD. After the design stage a prototype has been manufactured and tested at the MWL/KTH laboratory. The engineering process gave the product a cleaner design and allowed to identify feasible solutions ensuring increased sound attenuation performances.
Development of an Exhaust System for Agricultural Tractors
Uberti S.;Copeta A.
2020-01-01
Abstract
The main sources of sound emitted by vehicles are the engine and the rolling noise produced by the tires. In case agricultural tractors are considered, the engine and the transmission are responsible of the main emissions since they often work in the fields on soft ground at low speeds. This work focuses on the combined acoustic and mechanical development of a new exhaust system for an existing agricultural tractor, with the aim of providing a product with improved acoustic performances and a neater design. The host vehicle is equipped with a 300 hp diesel engine which can be particularly noisy at low rpm, with a further constraint being the “under the bonnet” available volume to fit the system into. The existing exhaust system is the baseline for the engineering process. The acoustic design is carried out by a 1D simulation software based on an electro-acoustic analogy, while the design modelling is performed by using Solidworks® 3D CAD. After the design stage a prototype has been manufactured and tested at the MWL/KTH laboratory. The engineering process gave the product a cleaner design and allowed to identify feasible solutions ensuring increased sound attenuation performances.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.
